EasyCast Clear Casting Epoxy
EasyCast is a two component, low odor, solvent free, clear casting epoxy. It’s ideal for casting small decorative items such as kitchen and bathroom knobs or for surface coatings up to 3/8 inch in thickness. Color EasyCast with Castin’Craft opaque pigments for solid colors, transparent dyes for that colored glass look. Mix and pour EasyCast into any of the Castin’Craft MC Molds to create your own decorative castings. Read complete instructions prior to use.
- Ideal for coatings or castings up to 3/8" thick
- Additional layering can be done for added depth
- Convenient 1:1 mix ratio by volume
- 20-30 minute working time / 8-12 hour tack-free time
- Full cure in 72 hours
- FDA Compliant (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.
- Produces durable castings or coatings that are high-gloss
8 oz. Kit = 4 oz. A + 4oz. B
16 oz. Kit = 8 oz. A + 8oz. B
32 oz. Kit = 16oz. A + 16oz. B
64 oz. Kit = 32oz. A + 32oz. B
1 gal. Kit = .5 gal. A + .5 gal. B
Easy to mix without bubbles. Plenty of time before heating becomes an issue. Sets a bit slower than some of the others I've used, but it's not a problem unless you are super impatient.
It has a slight yellow tint to it when using it as it is but if you add coloring to it you never see it. I will continue using this product but only with colors added
This is top notch casting epoxy. Easy to use. Thank you.
I am very happy with this product. It’s much more clear than the other resin I was using, no fogginess at all! Minimal micro bubbles too! I am really wanting a deeper pour resin, but this one I can pour up to 5oz without it flash curing and overheating. The best I’ve found for a reasonable price.