FREE SHIPPING ON U.S. ORDERS OF $50 OR MORE

EnviroTex Lite

(5 reviews) Write a Review

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use.

  • The original 1:1 epoxy coating system since 1969
  • Convenient 1:1 mix ratio by volume
  • 20-30 minute working time / 8-12 hour tack-free time
  • Full cure in 72 hours
  • FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured. 
  • Self-levels to approximately 1/16"
  • Produces a durable high-gloss surface coating for artwork, table tops, crafts, and more! 
What's included:

4 oz. Kit = 2 oz. A + 2 oz. B (covers 1 sq. ft.)
8 oz. Kit = 4 oz. A + 4oz. B (covers 2 sq. ft.)
16 oz. Kit = 8 oz. A + 8oz. B (covers 4 sq. ft.)
32 oz. Kit = 16oz. A + 16oz. B (covers 8 sq. ft.)
64 oz. Kit = 32oz. A + 32oz. B (covers16 sq. ft.)
1 gal. Kit = .5 gal. A + .5 gal. B (covers 32 sq. ft.)

$14.79 - $99.99
Flood Coat Calculator

DVD MOSAIC RESIN TRAY

RESIN PHOTO COASTERS

BUTTERFLY WING RESIN EARRINGS

Technical Specifications

Mix Ratio (A:B):
1:1
Work Time:
20-30 min
Hardness:
76D
Cure Time:
72 hours

Reviews

  • 2
    yellowing

    Posted by Patricia on Aug 5th 2021

    Do NOT purchase if making any artwork that will be exposed to any level of sunlight. Yellowing is to the extreme and the alcohol ink colors faded to virtually no color. For a senior on a fixed income, I just blew $106 on worthless resin. I just ordered ArtResin again and will stick with that brand as it does NOT yellow.

  • 5
    Epoxy bartop (commercial)

    Posted by Rachel on Jul 15th 2021

    This product is worth the high rating, it pours like butter and dries like glass! If you have the patience and follow the instructions you will not be disappointed! I wish I could post pictures to this site. My sports bar and grill has a brand new, very lon bar top and this is the last step. Poured over hammered copper, and the results are stunning! Could not be happier

  • 5
    Results

    Posted by Frank Di Martino on Jul 11th 2021

    I have been using envirotex lite for years now. I use this epoxy resin to finish coat my inspirational plaques and products in my ministry. While the resin is somewhat pricey to obtain, when the directions are followed, this resin imparts a beautiful glossy finish.

  • 4
    1gal

    Posted by Brian on Jun 23rd 2021

    Looks crystal clear when dried. make sure to wear gloves and put plastic down around project. could be less expensive

  • 5
    envirotex lite

    Posted by Patricia on Apr 15th 2021

    Awesome resin, must use warm in warm room. I even heat the mixing cup. Very little bubbles. Cures hard and quickly. Love it!